You might have a current limiting resistor in series with the transformer output

Sign up, and you can make all message times appear in your timezone. Sign up

Report problem with this ad

Dec 12, 2019
7:03:45pm

charles All-American

You might have a current limiting resistor in series with the transformer output

Report problem with this ad

charles

Bio page: charles
Joined: Apr 22, 2007
Last login: Apr 27, 2024
Total posts: 3,943 (9 FO)

Report problem with this ad

Messages

Author

Time

It just spent like an hour and a half trying to replace our old intercom doorbell with a new arlo camera one and

Slim Broscience major

12/12/19 6:54pm

Did you make it all 220?

BigD Coug

12/12/19 6:55pm

220, 221, whatever it takes

fredgarvin

12/12/19 7:17pm

^^^ Fabulous Mr Mom reference..

FulhamUte

12/12/19 8:02pm

How old is house? Mine is just over 2 years old and we had to get a transformer to make anything work

Jimo Dashen

12/12/19 6:57pm

Built in 2003

Slim

12/12/19 6:59pm

This is what I’d do. On a typical doorbell there are only 2 wires, how many wire

Nuke

12/12/19 9:51pm

You might have a current limiting resistor in series with the transformer output

charles

12/12/19 7:03pm

Check inside your doorbell chime housing.

charles

12/12/19 7:04pm

What is it I'm supposed to check?

Slim

12/12/19 7:05pm

The doorbell chime housing.

Zaphod

12/12/19 7:09pm

Take the cover off the chime.

charles

12/12/19 7:09pm

I'm try trying to replace this intercom which looks like the first picture front the front and the second picture when

Slim

12/12/19 7:15pm

That little motherboard has a pos and neg terminal and it was the wires that connected there that I tried to use to

Slim

12/12/19 7:18pm

Do you have a meter to measure the voltage?

charles

12/12/19 7:34pm

No. I will need to get one.

Slim

12/12/19 7:36pm

Pick one up from harbor freight for a lot cheaper then you can at Home Depot.

Nuke

12/12/19 9:52pm

It will work. The trick is finding the wire from the doorbell intercom outside and figure out

Cougar-Duck

12/12/19 7:36pm

Try this

charles

12/12/19 7:37pm

I am pretty sure my solution will work for you or set up. See my posts below.

Cougar-Duck

12/12/19 7:47pm

What is the power spec of the new camera?

charles

12/12/19 7:36pm

It says "voltage between 16V AC and 24V AC and a 10VA transformer

Slim

12/12/19 7:39pm

Try cougarduck suggestions above.

charles

12/12/19 7:49pm

Weird. The cameras I have in your house are all working fine.

Zaphod

12/12/19 7:03pm

This is a stupid response but I'd take that back and get a Nest Hello

cougarnerd

12/12/19 7:18pm

I already have 3 other arlo cameras

Slim

12/12/19 7:19pm

I got rid of all my Arlo's and bought into the Nest ecosystem once

cougarnerd

12/12/19 7:36pm

I understand the frustration. I spent an hour and half trying to figure out the

cougaman

12/12/19 7:23pm

Here is my guess on what you need to do:

Cougar-Duck

12/12/19 7:27pm

The transformer inside will look something like this

Cougar-Duck

12/12/19 7:31pm

You need to open up your main intercom inside. That’s where the correct power will come from – the transformer

Cougar-Duck

12/12/19 7:38pm

I think I get it. Since I have multiple intercoms I need to find which one is the main one and that one should have the

Slim

12/12/19 7:48pm

You just need to figure out where the wire from your front doorbell unit goes to the inside. From the inside,

Cougar-Duck

12/12/19 7:51pm

The key is finding the right wire inside the main unit that comes from the outside front doorbell. Once you find

Cougar-Duck

12/12/19 7:50pm

Oregon always has our solutions.

Albuq_Coug

12/12/19 8:09pm

Were you able to get it working?

Cougar-Duck

12/13/19 10:02am

Haha no.

Slim

12/13/19 2:49pm

Report problem with this ad

Posting on CougarBoard

In order to post, you will need to either sign up or log in.

Report problem with this ad