Sounds like ball bearings. It’s all ball bearings these days.

Sign up, and you'll be able to vote in polls. Sign up

Report problem with this ad

Jun 17, 2021
11:03:25pm

CDV User Rating Not Found

Sounds like ball bearings. It’s all ball bearings these days.

Report problem with this ad

CDV

Previous username: TheRealBarrySwitzer
Bio page: CDV
Joined: Oct 28, 2011
Last login: Apr 26, 2024
Total posts: 59,390 (27,345 FO)

Report problem with this ad

Messages

Author

Time

Lost hot water during a bathroom remodel. Plumbing question.

Chadillac

6/17/21 10:57pm

Sounds like ball bearings. It’s all ball bearings these days.

CDV

6/17/21 11:03pm

May also need some Prestone....no...Quaker State

Trent

6/18/21 12:07am

if you grab the hot water line coming out of the top of the water heater, is it

BYUFBDAD

6/17/21 11:03pm

Yes, it’s hot

Chadillac

6/17/21 11:10pm

then it's not the water heater. Do you have a recirc pump? Somewhere he

BYUFBDAD

6/17/21 11:35pm

is your water heater on? Maybe he turned the power off while he had the water

charles

6/17/21 11:07pm

And check the breaker

cracka

6/17/21 11:08pm

Water heater is on and there’s hot water coming out of it.

Chadillac

6/17/21 11:10pm

Make sure all the valves on the pipes in and out of the heater are on.

cracka

6/17/21 11:07pm

And no, the hot and cold water don't mix until the fixture. Separate pipes.

cracka

6/17/21 11:12pm

What if there is no cartridge? Would hot/cold mixing be possible then?

Chadillac

6/17/21 11:23pm

That wouldn't affect the whole house. Only the bathtub.

cracka

6/17/21 11:34pm

the mystery is the whole house is affected. Is the cold, cold? Or just not hot?

BYUFBDAD

6/17/21 11:38pm

Whole house. Hot is just slightly warmer than cold.

Chadillac

6/17/21 11:40pm

pressure normal? Did you check the valve coming out of the water heater and

BYUFBDAD

6/17/21 11:44pm

do you know if you have a recirculating pump in your system? If he crossed a

BYUFBDAD

6/17/21 11:50pm

pump may look something like this, somewhere around your heater

BYUFBDAD

6/17/21 11:54pm

Thanks for the suggestions. No recirc pump. House built in 94.

Chadillac

6/18/21 7:06am

Mixing Valve??? Point of use?

carcoug

6/17/21 11:20pm

Have you checked that both thermostats are set correctly?

CougarThug

6/18/21 2:15am

Did he rough plumb but not install the trim yet?

kooogar

6/18/21 6:02am

Yes, it’s Delta. Trim doesn’t come in for a few more weeks.

Chadillac

6/18/21 7:05am

Looks like I need Delta RP-46079. At least it’s less than $5!

Chadillac

6/18/21 7:27am

Yea, just shut your water off and install the valve and you will be set. Sloppy

kooogar

6/18/21 1:20pm

Just a follow up...

Chadillac

6/19/21 10:40pm

Good news. That rough in housing is wide open, the cold and hot

kooogar

6/20/21 12:25am

Report problem with this ad

Report problem with this ad