My Account
Sign up, and you'll be able to customize your font size and more!
Sign up
Report problem with this ad
Jun 18, 2021
1:20
:31
pm
kooogar
Starter
Yea, just shut your water off and install the valve and you will be set. Sloppy
Work by contractor!
Report problem with this ad
kooogar
Bio page
kooogar
Joined
Sep 11, 2006
Last login
Apr 28, 2024
Total posts
1,152 (1 FO)
Report problem with this ad
Messages
Author
Time
Lost hot water during a bathroom remodel. Plumbing question.
Chadillac
6/17/21 10:57pm
Sounds like ball bearings. It’s all ball bearings these days.
CDV
6/17/21 11:03pm
May also need some Prestone....no...Quaker State
Trent
6/18/21 12:07am
if you grab the hot water line coming out of the top of the water heater, is it
BYUFBDAD
6/17/21 11:03pm
Yes, it’s hot
Chadillac
6/17/21 11:10pm
then it's not the water heater. Do you have a recirc pump? Somewhere he
BYUFBDAD
6/17/21 11:35pm
is your water heater on? Maybe he turned the power off while he had the water
charles
6/17/21 11:07pm
And check the breaker
cracka
6/17/21 11:08pm
Water heater is on and there’s hot water coming out of it.
Chadillac
6/17/21 11:10pm
Make sure all the valves on the pipes in and out of the heater are on.
cracka
6/17/21 11:07pm
And no, the hot and cold water don't mix until the fixture. Separate pipes.
cracka
6/17/21 11:12pm
What if there is no cartridge? Would hot/cold mixing be possible then?
Chadillac
6/17/21 11:23pm
That wouldn't affect the whole house. Only the bathtub.
cracka
6/17/21 11:34pm
the mystery is the whole house is affected. Is the cold, cold? Or just not hot?
BYUFBDAD
6/17/21 11:38pm
Whole house. Hot is just slightly warmer than cold.
Chadillac
6/17/21 11:40pm
pressure normal? Did you check the valve coming out of the water heater and
BYUFBDAD
6/17/21 11:44pm
do you know if you have a recirculating pump in your system? If he crossed a
BYUFBDAD
6/17/21 11:50pm
pump may look something like this, somewhere around your heater
BYUFBDAD
6/17/21 11:54pm
Thanks for the suggestions. No recirc pump. House built in 94.
Chadillac
6/18/21 7:06am
Mixing Valve??? Point of use?
carcoug
6/17/21 11:20pm
Have you checked that both thermostats are set correctly?
CougarThug
6/18/21 2:15am
Did he rough plumb but not install the trim yet?
kooogar
6/18/21 6:02am
Yes, it’s Delta. Trim doesn’t come in for a few more weeks.
Chadillac
6/18/21 7:05am
Looks like I need Delta RP-46079. At least it’s less than $5!
Chadillac
6/18/21 7:27am
Yea, just shut your water off and install the valve and you will be set. Sloppy
kooogar
6/18/21 1:20pm
Just a follow up...
Chadillac
6/19/21 10:40pm
Good news. That rough in housing is wide open, the cold and hot
kooogar
6/20/21 12:25am
Report problem with this ad
Report problem with this ad
